use callback example

src/main.cpp

@@ -5,6 +5,31 @@
 
 Adafruit_NeoKey_1x4 neokey;  // Create the NeoKey object
 
+uint32_t Wheel(byte WheelPos);
+NeoKey1x4Callback blink(keyEvent evt);
+
+//define a callback for key presses
+NeoKey1x4Callback blink(keyEvent evt) {
+  uint8_t key = evt.bit.NUM;
+  
+  if (evt.bit.EDGE == SEESAW_KEYPAD_EDGE_RISING) {
+    Serial.print("Key press ");
+    Serial.println(key);
+    neokey.pixels.setPixelColor(key, Wheel(map(key, 0, neokey.pixels.numPixels(), 0, 255)));
+    
+  } else if (evt.bit.EDGE == SEESAW_KEYPAD_EDGE_FALLING) {
+    Serial.print("Key release ");
+    Serial.println(key);
+
+    neokey.pixels.setPixelColor(key, 0);
+  }
+
+  // Turn on/off the neopixels!
+  neokey.pixels.show();
+  return 0;
+}
+
+
 void setup() {
   Serial.begin(115200);
   while (! Serial) delay(10);
@@ -27,42 +52,16 @@ void setup() {
     neokey.pixels.show();
     delay(50);
   }
+
+  // set callbacks
+  for(int i=0; i<NEOKEY_1X4_KEYS; i++){
+    neokey.registerCallback(i, blink);
+  }
 }
 
 void loop() {
-  uint8_t buttons = neokey.read();
-
-  // Check each button, if pressed, light the matching neopixel
-  
-  if (buttons & (1<<0)) {
-    Serial.println("Button A");
-    neokey.pixels.setPixelColor(0, 0xFF0000); // red
-  } else {
-    neokey.pixels.setPixelColor(0, 0);
-  }
-
-  if (buttons & (1<<1)) {
-    Serial.println("Button B");
-    neokey.pixels.setPixelColor(1, 0xFFFF00); // yellow
-  } else {
-    neokey.pixels.setPixelColor(1, 0);
-  }
-  
-  if (buttons & (1<<2)) {
-    Serial.println("Button C");
-    neokey.pixels.setPixelColor(2, 0x00FF00); // green
-  } else {
-    neokey.pixels.setPixelColor(2, 0);
-  }
-
-  if (buttons & (1<<3)) {
-    Serial.println("Button D");
-    neokey.pixels.setPixelColor(3, 0x00FFFF); // blue
-  } else {
-    neokey.pixels.setPixelColor(3, 0);
-  }  
-
-  neokey.pixels.show();
+  // we handle all key events with the callbacks
+  neokey.read();
 
   delay(10);    // don't print too fast
 }