29 lines
No EOL
1.5 KiB
Markdown
29 lines
No EOL
1.5 KiB
Markdown
# UR Control
|
|
|
|
## Requirements
|
|
|
|
Python 3.10 needed. See python wheels support matrix for ur_rtde https://pypi.org/project/ur-rtde/
|
|
Virtualenv recommended. Install modules with `pip install -r requirements.txt`
|
|
|
|
URCap for Network control on Polyscope. Download: https://github.com/UniversalRobots/Universal_Robots_ExternalControl_URCap/releases
|
|
Tested with Version 1.0.5 on Polyscope 5.16.0
|
|
Installation Instructions: https://github.com/UniversalRobots/Universal_Robots_ROS_Driver/blob/master/ur_robot_driver/doc/install_urcap_e_series.md
|
|
|
|
### Install URCap in Simulator
|
|
URSim 5.16.0 inside VirtualBox.
|
|
Transfer donwloaded URCap via USB Thumbdrive to Programs UR10 folder on the virtual machine.
|
|
If error verr_pdm_no_usb_ports appreas, change USB Controller in VBox settings to USB-3.0-Controller (xHCI)
|
|
|
|
If resolution is too low, change it with `xrandr -s 1440x900`
|
|
|
|
To be able to reach the VM via network, set adapter to Bridge and promicious mode to allow all.
|
|
|
|
Follow instructions on how to setup externalControl: https://github.com/UniversalRobots/Universal_Robots_ROS_Driver/blob/master/ur_robot_driver/doc/install_urcap_e_series.md
|
|
|
|
Enable Remote Control: Settings - System - Remote Control - Enable
|
|
Run Program with the externalControl once. Error "Receive program failed" occurs. Stop Program. Not sure if this is needed, but RTDEControlInterface was not able to connect otherwise.
|
|
In main menu change from "local" to "remote control" in the top right corner.
|
|
|
|
## Misc
|
|
|
|
RTDEReceive works without enabling remote control. |